Overview
Microsoft Outlook Error 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

3219. Server. An Error Occured In Looking Up The User's Information In Mserv error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) : ‘Unknown Error3219. Server. An Error Occured In Looking Up The User’s Information In Mserv’
  • Task  – Receiving’ reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(3219. Server. An Error Occured In Looking Up The User’s Information In Mserv). click on OK to terminate the application.
  • An unknown error has occurred. 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv
  • 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv the operation cannot be performed because the connection to the server is offline
  • Error 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (3219. Server. An Error Occured In Looking Up The User’s Information In Mserv) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv

Reason for error:

Outlook 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv error can occur due to following reasons:

  1. Virus/Malware infection.
  2. Corrupt system data.
  3. System Level conflict..

How to Fix Outlook error code 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook 3219. Server. An Error Occured In Looking Up The User’s Information In Mserv error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
735   2       
Last Updated: 03/11/2016
Solution ID: 31883

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program. indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program. generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) : ‘Unknown Error”microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.’
  • Task  – Receiving’ reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.). click on OK to terminate the application.
  • An unknown error has occurred. “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.
  • “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program. the operation cannot be performed because the connection to the server is offline
  • Error “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (“microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.

Reason for error:

Outlook “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program. error can occur due to following reasons:

  1. Internet Connection issue.
  2. Corrupt system data.
  3. Incompatible windows update.

How to Fix Outlook error code “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program.:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook “microsoft Outlook Has Stopped Working” And Windows Is Searching For A Solution, Then It Just Says Close Program. error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
553   7       
Last Updated: 06/22/2016
Solution ID: 61851

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful. indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful. generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Microsoft Office Can't Find A Licence For This Application And A Repair Attempt Is Unsuccessful. error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) : ‘Unknown ErrorMicrosoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.’
  • Task  – Receiving’ reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.). click on OK to terminate the application.
  • An unknown error has occurred. Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.
  • Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful. the operation cannot be performed because the connection to the server is offline
  • Error Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.

Reason for error:

Outlook Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful. error can occur due to following reasons:

  1. Virus/Malware infection.
  2. Corrupt system data.
  3. Windows firewall issue..

How to Fix Outlook error code Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful.:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Microsoft Office Can’t Find A Licence For This Application And A Repair Attempt Is Unsuccessful. error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
755   6       
Last Updated: 05/26/2015
Solution ID: 16446

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Updates Kb3045999 And Kb3046269 Keeps Prompting To Install indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Updates Kb3045999 And Kb3046269 Keeps Prompting To Install generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Updates Kb3045999 And Kb3046269 Keeps Prompting To Install error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) : ‘Unknown ErrorUpdates Kb3045999 And Kb3046269 Keeps Prompting To Install’
  • Task  – Receiving’ reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Updates Kb3045999 And Kb3046269 Keeps Prompting To Install). click on OK to terminate the application.
  • An unknown error has occurred. Updates Kb3045999 And Kb3046269 Keeps Prompting To Install
  • Updates Kb3045999 And Kb3046269 Keeps Prompting To Install the operation cannot be performed because the connection to the server is offline
  • Error Updates Kb3045999 And Kb3046269 Keeps Prompting To Install: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Updates Kb3045999 And Kb3046269 Keeps Prompting To Install: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Updates Kb3045999 And Kb3046269 Keeps Prompting To Install) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Updates Kb3045999 And Kb3046269 Keeps Prompting To Install

Reason for error:

Outlook Updates Kb3045999 And Kb3046269 Keeps Prompting To Install error can occur due to following reasons:

  1. Slow Internet Connection
  2. System Ports being blocked.
  3. Windows firewall issue..

How to Fix Outlook error code Updates Kb3045999 And Kb3046269 Keeps Prompting To Install:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Updates Kb3045999 And Kb3046269 Keeps Prompting To Install error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
616   1       
Last Updated: 07/14/2016
Solution ID: 29217

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Url Outlook Today Not Working / Showing indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Url Outlook Today Not Working / Showing generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Url Outlook Today Not Working / Showing error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Url Outlook Today Not Working / Showing) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Url Outlook Today Not Working / Showing) : ‘Unknown ErrorUrl Outlook Today Not Working / Showing’
  • Task  – Receiving’ reported error (Url Outlook Today Not Working / Showing) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Url Outlook Today Not Working / Showing) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Url Outlook Today Not Working / Showing). click on OK to terminate the application.
  • An unknown error has occurred. Url Outlook Today Not Working / Showing
  • Url Outlook Today Not Working / Showing the operation cannot be performed because the connection to the server is offline
  • Error Url Outlook Today Not Working / Showing: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Url Outlook Today Not Working / Showing) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Url Outlook Today Not Working / Showing: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Url Outlook Today Not Working / Showing): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Url Outlook Today Not Working / Showing) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Url Outlook Today Not Working / Showing) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Url Outlook Today Not Working / Showing) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Url Outlook Today Not Working / Showing

Reason for error:

Outlook Url Outlook Today Not Working / Showing error can occur due to following reasons:

  1. Virus/Malware infection.
  2. Incorrect system configuration.
  3. Incompatible windows update.

How to Fix Outlook error code Url Outlook Today Not Working / Showing:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Url Outlook Today Not Working / Showing error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
773   9       
Last Updated: 02/23/2016
Solution ID: 29551

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Pop Imap Settings For Fastmail indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Pop Imap Settings For Fastmail generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Pop Imap Settings For Fastmail error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Pop Imap Settings For Fastmail) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Pop Imap Settings For Fastmail) : ‘Unknown ErrorPop Imap Settings For Fastmail’
  • Task  – Receiving’ reported error (Pop Imap Settings For Fastmail) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Pop Imap Settings For Fastmail) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Pop Imap Settings For Fastmail). click on OK to terminate the application.
  • An unknown error has occurred. Pop Imap Settings For Fastmail
  • Pop Imap Settings For Fastmail the operation cannot be performed because the connection to the server is offline
  • Error Pop Imap Settings For Fastmail: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Pop Imap Settings For Fastmail) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Pop Imap Settings For Fastmail: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Pop Imap Settings For Fastmail): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Pop Imap Settings For Fastmail) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Pop Imap Settings For Fastmail) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Pop Imap Settings For Fastmail) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Pop Imap Settings For Fastmail

Reason for error:

Outlook Pop Imap Settings For Fastmail error can occur due to following reasons:

  1. Internet Connection issue.
  2. Incorrect system configuration.
  3. Incompatible windows update.

How to Fix Outlook error code Pop Imap Settings For Fastmail:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Pop Imap Settings For Fastmail error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
558   4       
Last Updated: 04/25/2016
Solution ID: 23628

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Pop Imap Settings For Yandex Mail indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Pop Imap Settings For Yandex Mail generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Pop Imap Settings For Yandex Mail error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Pop Imap Settings For Yandex Mail) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Pop Imap Settings For Yandex Mail) : ‘Unknown ErrorPop Imap Settings For Yandex Mail’
  • Task  – Receiving’ reported error (Pop Imap Settings For Yandex Mail) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Pop Imap Settings For Yandex Mail) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Pop Imap Settings For Yandex Mail). click on OK to terminate the application.
  • An unknown error has occurred. Pop Imap Settings For Yandex Mail
  • Pop Imap Settings For Yandex Mail the operation cannot be performed because the connection to the server is offline
  • Error Pop Imap Settings For Yandex Mail: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Pop Imap Settings For Yandex Mail) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Pop Imap Settings For Yandex Mail: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Pop Imap Settings For Yandex Mail): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Pop Imap Settings For Yandex Mail) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Pop Imap Settings For Yandex Mail) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Pop Imap Settings For Yandex Mail) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Pop Imap Settings For Yandex Mail

Reason for error:

Outlook Pop Imap Settings For Yandex Mail error can occur due to following reasons:

  1. Virus/Malware infection.
  2. Incorrect system configuration.
  3. Windows firewall issue..

How to Fix Outlook error code Pop Imap Settings For Yandex Mail:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Pop Imap Settings For Yandex Mail error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
876   5       
Last Updated: 03/26/2016
Solution ID: 43559

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016 indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016 generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) : ‘Unknown Error”this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016’
  • Task  – Receiving’ reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016). click on OK to terminate the application.
  • An unknown error has occurred. “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016
  • “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016 the operation cannot be performed because the connection to the server is offline
  • Error “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (“this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016

Reason for error:

Outlook “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016 error can occur due to following reasons:

  1. Internet Connection issue.
  2. Incorrect system configuration.
  3. Incompatible windows update.

How to Fix Outlook error code “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook “this File Cannot Be Previewed Because There Is No Previewer Installed For It” Error When You Preview Excel Workbooks In Outlook 2016 error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
336   2       
Last Updated: 06/23/2015
Solution ID: 75266

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Pop Imap Settings For Gmail indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Pop Imap Settings For Gmail generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Pop Imap Settings For Gmail error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Pop Imap Settings For Gmail) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Pop Imap Settings For Gmail) : ‘Unknown ErrorPop Imap Settings For Gmail’
  • Task  – Receiving’ reported error (Pop Imap Settings For Gmail) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Pop Imap Settings For Gmail) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Pop Imap Settings For Gmail). click on OK to terminate the application.
  • An unknown error has occurred. Pop Imap Settings For Gmail
  • Pop Imap Settings For Gmail the operation cannot be performed because the connection to the server is offline
  • Error Pop Imap Settings For Gmail: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Pop Imap Settings For Gmail) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Pop Imap Settings For Gmail: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Pop Imap Settings For Gmail): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Pop Imap Settings For Gmail) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Pop Imap Settings For Gmail) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Pop Imap Settings For Gmail) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Pop Imap Settings For Gmail

Reason for error:

Outlook Pop Imap Settings For Gmail error can occur due to following reasons:

  1. Internet Connection issue.
  2. Incorrect system configuration.
  3. System Level conflict..

How to Fix Outlook error code Pop Imap Settings For Gmail:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Pop Imap Settings For Gmail error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
511   7       
Last Updated: 07/26/2015
Solution ID: 11238

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Overview
Microsoft Outlook Error Pop Imap Settings For Zoho indicates that there is some issue with Outlook application.  In this article we have given step by step instructions to resolve the issue. The error Pop Imap Settings For Zoho generally occurs while installing, opening, updating, uninstalling, removing or while sending/receiving emails.

Please bookmark this page by pressing Ctrl+D in your browser so that you can visit this page again, if your system restarts during the resolution process.

Pop Imap Settings For Zoho error support

Disclaimer:
The steps given below involves changing system setting and it can damage your PC if the steps are not follow properly. It is highly recommended these steps  should be followed under supervision of an Expert technician. We will have no responsibility or liability in relation to any loss or damage that occurs in the process.

Affected Microsoft Outlook Versions:

  • Outlook 365
  • Outlook 2016
  • Outlook 2013
  • Outlook 2010
  • Outlook 2007
  • Outlook 2003

Affected Operating Systems:

  • Windows 10/Windows 10.1
  • Windows 8/8.1
  • Windows 7
  • Windows Vista

Common Error message:

  • Task ‘XXXX – Sending’ reported error (Pop Imap Settings For Zoho) : ‘Your outgoing (SMTP) server does not support SSL-secured connections. If SSL-secured connections have worked in the past, contact your server administrator or Internet service provider (ISP).’
  • Task ‘XXXXXXX – Receiving’ reported error (Pop Imap Settings For Zoho) : ‘Unknown ErrorPop Imap Settings For Zoho’
  • Task  – Receiving’ reported error (Pop Imap Settings For Zoho) : ‘Outlook data file cannot be accessed.’
  • Task  – Sending and Receiving’ reported error (Pop Imap Settings For Zoho) : ‘Outlook data file cannot be accessed.’
  • Application failed to initialize properly(Pop Imap Settings For Zoho). click on OK to terminate the application.
  • An unknown error has occurred. Pop Imap Settings For Zoho
  • Pop Imap Settings For Zoho the operation cannot be performed because the connection to the server is offline
  • Error Pop Imap Settings For Zoho: The process cannot access the file because another process has blocked a portion of the file.
  • Service reported error (Pop Imap Settings For Zoho) Outlook cannot connect to your (smtp) e-mail server.
  • “Error with Send/Receive’ during normal sync. There was an error synchronizing your folder hierarchy.”
  • Error Pop Imap Settings For Zoho: Not enough quota is available to process this command.
  • ‘Sending and Receiving reported error (Pop Imap Settings For Zoho): Outlook is unable to connect to your outgoing (SMTP) e-mail server’
  • (Pop Imap Settings For Zoho) Cannot send the message. Verify the email address in your account properties. The server responded:550 user (Your Email ID) has exceeded their send quota.
  • Sending reported error (Pop Imap Settings For Zoho) : Cannot Send the Message. Verify the e-mail address in your account properties.
  • Task ‘XXXXXX – Receiving’ reported error (Pop Imap Settings For Zoho) : ‘The message store has reached its maximum size. To reduce the amount of data in this message store, select some items that you no longer need, and permanently (SHIFT + DEL) delete them.’
  • The connection to the server has failed. Account: ‘<account name>’, Server: ‘<SMTP server name>’, Protocol: SMTP, Port: 25, Secure (SSL): No, Socket Error: 10051, Error Number: Pop Imap Settings For Zoho

Reason for error:

Outlook Pop Imap Settings For Zoho error can occur due to following reasons:

  1. Virus/Malware infection.
  2. Corrupt system data.
  3. System Level conflict..

How to Fix Outlook error code Pop Imap Settings For Zoho:

  • SFC Scan

Open Command Prompt in elevated mode. To open Command prompt in Windows 10, type CMD in search bar (“Ask me anything“) and right click on it and Click on “Run as Administrator“. And in the next window click on Yes.

SFC scan

In command prompt type the following command:

sfc /scannow

sfc scan result

  • Disable Skype/Antivirus

Sometimes Skype and any installed antivirus can conflict with windows update. While updating the windows disable them. You can enable them once the update is done successfully.

If  Outlook Pop Imap Settings For Zoho error still persists even after following the above steps, it means the issue is critical and it should be fixed by manually replacing the update files. It is highly recommended to talk to one of our Support specialist to get the issue resolved.


Rate this Solution
Did you find this article helpful?
811   4       
Last Updated: 04/13/2015
Solution ID: 77582

Posted In: Microsoft Outlook

Tags: , , , , , , , , , , , , , , , , ,

Next Page »