This document explains how to fix error The messaging interface has returned an unknown error. If the problem persists, restart Outlook if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

This solutions applies for following version of Microsoft Outlook:

  • Outlook 2016
  • Outlook 365
  • Outlook 2013
  • Outlook 2007
  • Outlook 2010
  • Microsoft Office (2013/365/2016)
Error Code Log
Avg. Time to Resolve Issue   40 mins
Difficulty Very Hard
Log Name: Microsoft Outlook <version> 2.43
Source: Incompatible System Files
Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
Operating System
  • Windows 7
  • Windows 8
  • Windows 10
Level: Memory Level
User: <Outlook username>
Description:
  • Faulting Application Name: Microsoft Outlook <Application name>, version: 1.0.0277.59008, time stamp: 0×92173820
  • Faulting module name: Outlook  update.dll, version: 1.4.0539.29622
  • Exception code: 0xa05g376e
  • Fault offset: 0xa01b274e
  • Faulting process ID: 0×979
  • Faulting application start time: 0x04daeg2d51089341
  • Faulting application path: ~<userpath>
  • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
  • Report ID: a1c38a84-1362-85a3-1117-5968dbc4e176

Cause of Outlook Error Code:

  • Internet connectivity issue
  • Temporary store location is infected with active malware

How to fix Outlook Error The Messaging Interface Has Returned An Unknown Error. If The Problem Persists, Restart Outlook

Step 1: Temporarily Disable Windows Firewall Setting
1. Hold Windows Key + R and Enter “Firewall.cpl” (without quotes)
2. Press OK.

3. Click on “Turn Windows Firewall On or Off
Turn Windows Firewall on or off4. In Private network Setting, select “Turn off Windows firewall (not recommended)
5. Do the same for Public Network Setting.
Disable Windows Firewall6. Press OK.
Note: After the issue is resolved you must turn the Windows Firewall on.

Step 2: Check for system corruption

1. Press Windows Key + R and Type “CMD” (without quotes)
2. Press OK.
open command prompt3. In command Prompt Copy following commands (Simply select the command and hold Ctrl+C and press Ctrl+V in command prompt)

 sfc /scannow 

sfc scannow
The system will take some time to check. Let it run for a while. If it finds any issues in “system” integrity it will automatically fix it.

Note: You will need Administrator Access to Run the above command. Simply Right Click on cmd button and select “Run as Administrator

 You can contact our 24×7 customer Live Technician for any help during the whole process. 

In most cases Outlook error The messaging interface has returned an unknown error. If the problem persists, restart Outlook should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

Rate this Solution
Did this article help you?
42   3      
Last Updated: 11/02/2016
Solution ID: 968967

  • Cannot Start Microsoft Office Outlook. Mapi32.dll Is Corrupt Or The Wrong Version – How to Fix Steps
  • Unfortunately, Outlook.com Has Stopped – How to Fix Steps
  • We’re Sorry But Microsoft Office Has Run Into An Error That Is Preventing It From Working Correctly – How to Fix Steps
  • Setup can not find the required Setup controller file.  Either there was a network error, an error reading from the CD, DVD, or or other installation media, or a problem with the package you downloaded. Outlook Error Code – How to Fix Steps
  • 0x800CCC7D Outlook Error Code – How to Fix Steps
  • The Form Required To View This Message Cannot Be Displayed – How to Fix Steps
  • Log onto incoming mail server (IMAP): A secure connection to the server cannot be established
  • 0x80070002 Outlook Error Code – How to Fix Steps
  • Invalid Xml, The View Cannot Be Loaded – How to Fix Steps
  • Outlook Has Run Into An Error That Is Preventing It From Working Correctly – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error code this item has not been received from the server. if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    Bhis item has not been received from the server Error Code Log
    Avg. Time to Resolve Issue   45 mins
    Difficulty Critical
    Log Name: Microsoft Outlook <version> 1.20
    Source: System Error
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: System Level
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 2.7.9360.39142, time stamp: 0×93155085
    • Faulting module name: Outlook  error.dll, version: 6.0.1240.14328
    • Exception code: 0xb03d357a
    • Fault offset: 0xe04g833e
    • Faulting process ID: 0×947
    • Faulting application start time: 0x02cgeb7g26884717
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: f3c35e72-2541-72d2-5689-9427bbd1e811

    Cause of Outlook Error Code:

    • Internet connectivity issue
    • Temporary files location is infected with active malware

    How to Resolve Outlook Error This Item Has Not Been Received From The Server:

    Step 1: Check Proxy Settings

    1. In Start Searchbox type CMD
    2. Click on CMD.
    Office Resolve Error Proxy Check 3. In command Prompt Copy following commands (Simply select the command and hold ctrl+c and press ctrl+v in command prompt)

     netsh winhttp import proxy source=ie 

    Check Proxy Setting

    Note: You will need Administrator Access to Run the above command. Simply Right Click on CMD button and select “Run as Administrator

    If you get the message “Direct Access (no proxy server)“, continue to the next step otherwise disable proxy from Network Settings.

     You can contact our 24×7 Live support for any help during the whole process. 

    Step 2: Check Proxy Settings

    1. In Start Searchbox type CMD
    2. Click on CMD.
    Office Resolve Error Proxy Check 3. In command Prompt Copy following commands (Simply select the command and press ctrl+c and press ctrl+v in command prompt)

     netsh winhttp import proxy source=ie 

    Check Proxy Setting

    Note: You will need Administrator Access to Run the above command. Simply Right Click on CMD button and select “Run as Administrator

    If you get the message “Direct Access (no proxy server)“, continue to the next step otherwise disable proxy from Network Settings.

     You can contact our 24×7 Live support for any help during the whole process. 

    In most cases Outlook error code this item has not been received from the server should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    13   3      
    Last Updated: 15/01/2016
    Solution ID: 659519

  • 0x80042108 Outlook Error Code – How to Fix Steps
  • 0x8DE00001 Outlook Error Code – How to Fix Steps
  • Not Enough Storage Is Available To Process This Command Outlook – How to Fix Steps
  • Email Address is not connected to this account – How to Fix Steps
  • 0x8004060c Outlook Error Code – How to Fix Steps
  • Outlook 2016 Out Of Memory Or System Resources – How to Fix Steps
  • 0x80004005-0x000b22-0x000501 Outlook Error Code – How to Fix Steps
  • An Encrypted Connection To Your Mail Server Is Not Available Outlook
  • Unable to send emails from Outlook after installing Windows 10 – How to Fix Steps
  • 800704CF Outlook Error Code – How to Fix Steps phone
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error Invalid XML, the view cannot be loaded. if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    Invalid XML, the view cannot be loaded. Error Code Log
    Avg. Time to Resolve Issue   40 mins
    Difficulty Hard
    Log Name: Microsoft Outlook <version> 1.33
    Source: Application Error
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Administrator
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 8.5.8261.53097, time stamp: 0×31418861
    • Faulting module name: Outlook  error.dll, version: 2.6.9553.25276
    • Exception code: 0xa06g660b
    • Fault offset: 0xa03g664b
    • Faulting process ID: 0×405
    • Faulting application start time: 0x19geef5g68212000
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: f9c75a17-2648-26a6-7338-2966dac4b132

    Cause of Invalid Xml, The View Cannot Be Loaded Error coce:

    • Slow ISP Connection
    • Temporary files location is infected with active threat

    How to fix Outlook Error Code Invalid Xml, The View Cannot Be Loaded

    Step 1: Disable Proxy:

    1. Press down Windows Key + R and Enter “CMD” (without quotes)
    2. Hit Enter key
    Office Resolve Error Proxy Check 3. In command Prompt Copy following commands (Simply select the command and press ctrl+c and press ctrl+v in command prompt)

     netsh winhttp import proxy source=ie 

    Check Proxy Setting

    Note: You will need Administrator Access to Run the above command. Simply Right Click on CMD button and select “Run as Administrator

    If you get the message “Direct Access (no proxy server)“, continue to the next step otherwise disable proxy from Network Settings.

     You can contact our 24×7 Live support for any help during the whole process. 

    Step 2: Check Proxy Settings

    1. Press Windows Key + R and Type CMD
    2. Hit Enter key
    Office Resolve Error Proxy Check 3. In command Prompt Copy following commands (Simply select the command and press ctrl+c and press ctrl+v in command prompt)

     netsh winhttp import proxy source=ie 

    Check Proxy Setting

    Note: You will need Administrator Access to Run the above command. Simply Right Click on CMD button and select “Run as Administrator

    If you get the message “Direct Access (no proxy server)“, continue to the next step otherwise disable proxy from Network Settings.

     You can contact our 24×7 Live support for any help during the whole process. 

    In most cases Outlook error code Invalid XML, the view cannot be loaded. should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    94   1      
    Last Updated: 28/01/2016
    Solution ID: 539980

  • Setup can not find the required Setup controller file.  Either there was a network error, an error reading from the CD, DVD, or or other installation media, or a problem with the package you downloaded. Outlook Error Code – How to Fix Steps
  • Outlook follow up flag not working Error Code – How to Fix Steps
  • 0x800CCCF4 Outlook Error Code – How to Fix Steps
  • 3260 Outlook Error Code – How to Fix Steps
  • Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name in Outlook – How to Fix Steps
  • 0x80042108 Outlook Error Code – How to Fix Steps
  • Outlook 2013 closes after opening – How to Fix Steps
  • 554 Outlook Error Code – How to Fix Steps
  • 0x80048002 Outlook Error Code – How to Fix Steps
  • An unexpected Error has occurred Outlook Error Code – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error code Either there is no default mail client or the current mail client cannot fulfill the messaging request.  if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    Error Code Log
    Avg. Time to Resolve Issue   50 mins
    Difficulty Very Hard
    Log Name: Microsoft Outlook <version> 5.75
    Source: DNS Error
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Administrator
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 4.1.0524.09120, time stamp: 0×89924948
    • Faulting module name: Outlook  event.dll, version: 9.9.4251.37251
    • Exception code: 0xb03g510b
    • Fault offset: 0xa09f893b
    • Faulting process ID: 0×595
    • Faulting application start time: 0x16abec4e11080685
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: d6e33e81-2631-62e1-4224-5522aee6f831

    Cause of Outlook Error Code:

    • Proxy issue
    • System Level Conflict

    How to Resolve Outlook Error Code Either There Is No Default Mail Client Or The Current Mail Client Cannot Fulfill The Messaging Request:

    Step 1: Start Outlook in Safe Mode:
    1. Hold Win Key + R and Enter “Outlook /safe”
    2. Press OK.

    Step 2: Temporarily Disable Windows Firewall Setting :

    1. Press Windows Key + R. Run Dialogue Box will open up.
    2. Type Firewall.cpl and Press OK.

    3. Click on “Turn Windows Firewall On or Off
    Turn Windows Firewall on or off4. In Private network Setting, select “Turn off Windows firewall (not recommended)
    5. Do the same for Public Network Setting.
    Disable Windows Firewall6. Press OK.
    Note: After the issue is resolved you must turn the Windows Firewall on.

    In most cases Outlook error code Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook…. should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    36   2      
    Last Updated: 18/02/2016
    Solution ID: 154695

  • 0x80042109 Outlook Error Code – How to Fix Steps
  • 0x800700C1 Outlook Error Code – How to Fix Steps
  • 8024402F Outlook Error Code – How to Fix Steps
  • Either There Is No Default Mail Client Or The Current Mail Client Cannot Fulfill The Messaging Request. Please Run Microsoft Outlook And Set It As The Default Mail Client – How to Fix Steps
  • Outlook 2013 Constantly Crashing – How to Fix Steps
  • Outlook Could Not Create The Work File. Check The Temp Environment Variable – How to Fix Steps
  • 0x85002012 Outlook Error Code – How to Fix Steps
  • 0x85050041 Outlook Error Code – How to Fix Steps
  • 0x80070002 Outlook Error Code – How to Fix Steps
  • Outlook 365 stuck on processing Error Code – How to Fix Steps
  • June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error code We’re sorry,but Outlook has run into an error that is preventing it from working correctly. Outlook will need to be closed as a result. if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    Error Code Log
    Avg. Time to Resolve Issue   40 mins
    Difficulty Hard
    Log Name: Microsoft Outlook <version> 2.07
    Source: Application Error
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Administrator
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 6.2.9760.62561, time stamp: 0×19890052
    • Faulting module name: Outlook  log.dll, version: 2.0.8375.75850
    • Exception code: 0xc09f874a
    • Fault offset: 0xe02f893a
    • Faulting process ID: 0×710
    • Faulting application start time: 0x17ceee4g54034408
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: b4a87a54-9849-45a4-9723-8944cgb8e815

    Cause of Outlook Error Code:

    • Slow ISP Connection
    • System DLL files conflict

    How to fix Outlook Error Code We’re Sorry,but Outlook Has Run Into An Error

    Step 1: Check for system corruption:

    1. Press Windows Key + R and Type “CMD” (without quotes)
    2. Press OK.
    open command prompt3. In command Prompt Copy following commands (Simply select the command and hold Ctrl+C and press Ctrl+V in command prompt)

     sfc /scannow 

    sfc scannow
    The system will take some time to check. Let it run for a while. If it finds any issues in “operating system” integrity it will automatically fix it.

    Note: You will need Administrator Access to Run the above command. Simply Right Click on cmd button and select “Run as Administrator

     You can contact our 24×7 customer Live Technician for any help during the whole process. 

    Step 2: Disable Windows Firewall Temporarily :

    1. Press Win Key + R. Run Dialogue Box will open up.
    2. Enter Firewall.cpl and Click OK.

    3. Click on “Turn Windows Firewall On or Off
    Turn Windows Firewall on or off4. In Private network Setting, select “Turn off Windows firewall (not recommended)
    5. Do the same for Public Network Setting.
    Disable Windows Firewall6. Press OK.
    Note: After the issue is resolved you must turn the Windows Firewall on.

    In most cases Outlook error code We’re sorry,but Outlook has run into an error that is preventing it from working correctly. Outlook will need to be closed as a result. should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    32   1      
    Last Updated: 22/02/2016
    Solution ID: 889590

  • The Operation Cannot Be Performed Because The Message Has Been Changed – How to Fix Steps
  • Sorry We’re Having Trouble Starting Outlook. Only One Version Of Outlook Can Run At A Time – How to Fix Steps
  • Outlook 2016 not showing Emails Error Code – How to Fix Steps
  • 0x850500 Outlook Error Code – How to Fix Steps
  • Cannot Send the Message. Verify the e-mail address in your account properties – How to Fix Steps
  • 0x80042109 Outlook Error Code – How to Fix Steps
  • Invalid Xml, The View Cannot Be Loaded – How to Fix Steps
  • Log onto incoming mail server (IMAP): A secure connection to the server cannot be established
  • 0x80004005-0x000b22-0x000501 Outlook Error Code – How to Fix Steps
  • 0x80020401 Outlook Error Code – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix error Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    Error Code Log
    Avg. Time to Resolve Issue   45 mins
    Difficulty Hard
    Log Name: Microsoft Outlook <version> 7.47
    Source: Incompatible System Files
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Administrator
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 3.7.8767.05827, time stamp: 0×58216789
    • Faulting module name: Outlook  log.dll, version: 6.9.9890.08772
    • Exception code: 0xb08g099e
    • Fault offset: 0xa09c234d
    • Faulting process ID: 0×180
    • Faulting application start time: 0x08fcee3f16870265
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: e1f92c78-9247-97c1-9621-7338eac3g293
    [/su_tab] [/su_tabs]

    Cause of  Error Code:

    • Slow Internet Connection
    • Microsoft Outlook internal Application Conflict

    Steps to resolve Outlook Error Code Outlook Cannot Log On. Verify You Are Connected To The Network And Are Using The Proper Server And Mailbox Name.

    Step 1: Start Outlook in Safe Mode
    1. Hold Windows Key + R and Enter “Outlook /safe” (without quotes)
    2. Click OK.

    Step 2: Disable Proxy
    1. Hold Windows Key + R. Run Dialogue Box will open up.
    2. Type CMD and Click OK.
    Office Resolve Error Proxy Check 3. In command Prompt Copy following commands (Simply select the command and press ctrl+c and press ctrl+v in command prompt)

     netsh winhttp import proxy source=ie 

    Check Proxy Setting

    Note: You will need Administrator Access to Run the above command. Simply Right Click on cmd button and select “Run as Administrator

    If you get the message “Direct Access (no proxy server)“, continue to the next step otherwise disable proxy from Network Settings.

     You can contact our 24×7 Live support for any help during the whole process. 

    In most cases Outlook error code Outlook cannot log on. Verify you are connected to the network and are using the proper server and mailbox name. should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    21   2      
    Last Updated: 03/01/2016
    Solution ID: 879418

  • The Operation Cannot Be Performed Because The Message Has Been Changed – How to Fix Steps
  • 0x8004210A Outlook Error Code – How to Fix Steps
  • Outlook Send Receive Error – How to Fix Steps
  • pop3 error outlook – How to Fix Steps
  • Outlook 2016 Hanging On Loading Profile – How to Fix Steps
  • 3260 Outlook Error Code – How to Fix Steps
  • Outlook Ntdll.dll Error – How to Fix Steps
  • 0x800CCC1A Outlook Error Code – How to Fix Steps
  • Outlook Unable To Connect To Outgoing Smtp Server – How to Fix Steps
  • 0x80042109 Outlook Error Code – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook 2010 Unable to send/receive, Error 0x800CCCDD if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    Outlook 2010 Unable to sendreceive, Error 0x800CCCDD Error Code Log
    Avg. Time to Resolve Issue   40 mins
    Difficulty Hard
    Log Name: Microsoft Outlook <version> 3.46
    Source: Application Conflict
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Application Level
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 5.8.7015.85817, time stamp: 0×76944045
    • Faulting module name: Outlook  error.dll, version: 9.9.1123.48045
    • Exception code: 0xd04g630g
    • Fault offset: 0xa05f946c
    • Faulting process ID: 0×729
    • Faulting application start time: 0x01aaea9e14759804
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: a9d74c13-7267-23e3-6282-4149eda2c372

    Cause of Outlook 2010 Unable To Sendreceive, Error 0x800cccdd Outlook Error Code:

    • DNS Conflict
    • Microsoft Outlook internal Application Conflict

    How to fix Outlook Error Outlook 2010 Unable To Sendreceive, Error 0x800cccdd

    Step 1: Start Outlook in Safe Mode
    1. Hold Win Key + R and Type “Outlook /safe” (without quotes)
    2. Click OK.

    Step 2: Temporarily Disable any installed 3rd Party Antivirus:

    Some times Antivirus/Malware/Adware programs mark Microsoft office installer files as Spam and block it from installing. Please refer your vendors website for disabling it temporarily. Once installation is done you can activate it again.

    In most cases Outlook error Outlook 2010 Unable to sendreceive, Error 0x800CCCDD should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    29   0      
    Last Updated: 01/02/2016
    Solution ID: 589984

  • 0x8004011d Outlook Error Code – How to Fix Steps
  • 0x8004102A Outlook Error Code – How to Fix Steps
  • 0x85050041 Outlook Error Code – How to Fix Steps
  • Log onto incoming mail server (IMAP): A secure connection to the server cannot be established
  • 0x80070005 Outlook Error Code – How to Fix Steps
  • 0x800CCCF4 Outlook Error Code – How to Fix Steps
  • Outlook won’t open Error Code – How to Fix Steps
  • Cannot Start Microsoft Outlook – How to Fix Steps
  • 4201 Outlook Error Code – How to Fix Steps
  • This Application Has Failed To Start Because Msvcr80.dll Was Not Found Outlook – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error code 85002007 if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2010
    • Outlook 2007
    • Microsoft Office (2013/365/2016)
    85002007 Error Code Log
    Avg. Time to Resolve Issue   40 mins
    Difficulty Critical
    Log Name: Microsoft Outlook <version> 6.88
    Source: DNS Error
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Administrator
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 4.0.4156.35324, time stamp: 0×38006629
    • Faulting module name: Outlook  error.dll, version: 2.4.1261.74821
    • Exception code: 0xb04c485f
    • Fault offset: 0xc01b320f
    • Faulting process ID: 0×280
    • Faulting application start time: 0x16dddb0a78885368
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: a9d37d36-4916-86e5-1369-3553bea7c377

    Cause of 85002007 Outlook Error Code:

    • Windows Firewall Issue
    • Microsoft Outlook internal Application Conflict

    Steps to resolve Outlook Error Code 85002007

    Step 1: Check for corrupt system files
    1. Press Win Key + R. Run Dialogue Box will open up.
    2. Type CMD and Click OK.
    open command prompt3. In command Prompt Copy following commands (Simply select the command and press Ctrl+C and press Ctrl+V in command prompt)

     sfc /scannow 

    sfc scannow
    The system will take some time to check. Let it run for a while. If it finds any issues in “system” integrity it will automatically fix it.

    Note: You will need Administrator Access to Run the above command. Simply Right Click on CMD button and select “Run as Administrator

     You can contact our 24×7 customer Live Technician for any help during the whole process. 

    Step 2: Start Outlook in Safe Mode:
    1. Press Windows Key + R and Type “Outlook /safe”
    2. Press OK.

    In most cases Outlook error 85002007 should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    73   2      
    Last Updated: 28/02/2016
    Solution ID: 576584

  • Outlook Upgrade In Progress Stuck- How to Fix Steps
  • 0x800CCC6F Outlook Error Code – How to Fix Steps
  • Either There Is No Default Mail Client Or The Current Mail Client Cannot Fulfill The Messaging Request. Please Run Microsoft Outlook And Set It As The Default Mail Client – How to Fix Steps
  • 0x800CCC1A Outlook Error Code – How to Fix Steps
  • 0x80070718 Outlook Error Code – How to Fix Steps
  • Outlook 2013 Constantly Crashing – How to Fix Steps
  • 0x800c0133 Outlook Error Code – How to Fix Steps
  • 0x80042109 Outlook Error Code – How to Fix Steps
  • The Form Required To View This Message Cannot Be Displayed – How to Fix Steps
  • 0x8004011d Outlook Error Code – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error 80048888 if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2007
    • Outlook 2010
    • Microsoft Office (2013/365/2016)
    80048888 Error Code Log
    Avg. Time to Resolve Issue   50 mins
    Difficulty Hard
    Log Name: Microsoft Outlook <version> 8.66
    Source: SSL Conflict
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Application Level
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 3.1.3517.79386, time stamp: 0×66113368
    • Faulting module name: Outlook  update.dll, version: 6.2.7141.91085
    • Exception code: 0xd03b711b
    • Fault offset: 0xc07d628f
    • Faulting process ID: 0×156
    • Faulting application start time: 0x16fgac8g40391924
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: d1a44d62-2122-12a9-4723-2359bge9e469

    Cause of Outlook Error Code:

    • Internet connectivity issue
    • Junk store location contains active malware

    How to fix Outlook Error 80048888

    Step 1: Check Windows Firewall Settings :
    1. Press Win Key + R and Enter “Firewall.cpl” (without quotes)
    2. Click OK.

    3. Click on “Turn Windows Firewall On or Off
    Turn Windows Firewall on or off4. In Private network Setting, select “Turn off Windows firewall (not recommended)
    5. Do the same for Public Network Setting.
    Disable Windows Firewall6. Press OK.
    Note: After the issue is resolved you must turn the Windows Firewall on.

    Step 2: Start Outlook in Safe Mode:
    1. Press Windows Key + R and Enter “Outlook /safe” (without quotes)
    2. Press OK.

    In most cases Outlook error code 80048888 should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    27   2      
    Last Updated: 22/02/2016
    Solution ID: 288151

  • 0x800c0133 Outlook Error Code – How to Fix Steps
  • None Of The Authentication Methods Supported By This Client Are Supported By Your Server – How to Fix Steps
  • Task Rss Feeds Reported Error Outlook – How to Fix Steps
  • We’re Sorry But Microsoft Office Has Run Into An Error That Is Preventing It From Working Correctly – How to Fix Steps
  • Outlook Unable To Connect To Outgoing Smtp Server – How to Fix Steps
  • 0x80040900 Outlook Error Code – How to Fix Steps
  • 0x80020401 Outlook Error Code – How to Fix Steps
  • The Operating System Is Not Presently Configured To Run This Application – How to Fix Steps /n
  • Outlook Cannot Connect To Outgoing Smtp Server – How to Fix Steps
  • Outlook Cannot Connect To Your Outgoing (Smtp) E-mail Server – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    This document explains how to fix Microsoft Outlook error code 4201 if it is not working properly or throwing an error while installing, updating,  launching/opening, performing action like sending or receiving emails, configuring emails etc.

    This solutions applies for following version of Microsoft Outlook:

    • Outlook 2016
    • Outlook 365
    • Outlook 2013
    • Outlook 2010
    • Outlook 2007
    • Microsoft Office (2013/365/2016)
    4201 Error Code Log
    Avg. Time to Resolve Issue   50 mins
    Difficulty Very Hard
    Log Name: Microsoft Outlook <version> 5.47
    Source: System Error
    Also known as: Outlook fehler code, foutcode, fejlkode, code d’erreur, codice di errore, feil kode, cod de eroare, código de error
    Operating System
    • Windows 7
    • Windows 8
    • Windows 10
    Level: Application Level
    User: <Outlook username>
    Description:
    • Faulting Application Name: Microsoft Outlook <Application name>, version: 6.0.1085.36142, time stamp: 0×75710820
    • Faulting module name: Outlook  error.dll, version: 6.2.7900.99657
    • Exception code: 0xe01e090g
    • Fault offset: 0xa02d048a
    • Faulting process ID: 0×182
    • Faulting application start time: 0x18fegf8a93890302
    • Faulting application path: ~<userpath>
    • Faulting module path: ~C:\Program Files (x86)\Microsoft Outlook\<appname>
    • Report ID: e8b28a38-2153-65c6-8676-8219ede6a798
    [/su_tab] [/su_tabs]

    Cause of Outlook Error Code:

    • Internet connectivity issue
    • Microsoft Outlook internal Application Conflict

    Steps to resolve Outlook Error Code 4201

    Step 1: Disable Windows Firewall Temporarily :
    1. Hold Windows Key + R and Enter “Firewall.cpl” (without quotes)
    2. Press OK.

    3. Click on “Turn Windows Firewall On or Off
    Turn Windows Firewall on or off4. In Private network Setting, select “Turn off Windows firewall (not recommended)
    5. Do the same for Public Network Setting.
    Disable Windows Firewall6. Press OK.
    Note: After the issue is resolved you must turn the Windows Firewall on.

    Step 2: Temporarily Disable any installed 3rd Party Antivirus:

    Some times Antivirus/Malware/Adware programs mark Microsoft office installer files as Spam and block it from installing. Please refer your vendors website for disabling it temporarily. Once installation is done you can activate it again.

    In most cases Outlook error code 4201 should be resolved by following above steps. If however the issue still persists it means there is some critical issue with your system which needs to be fixed manually and is recommended to be done by an experienced Computer Technician.

    You can chat one-on-one with one of our Outlook Support Representative 24/7 by clicking on the Chat button.

    Rate this Solution
    Did this article help you?
    92   2      
    Last Updated: 28/01/2016
    Solution ID: 229363

  • Outlook Upgrade In Progress Stuck- How to Fix Steps
  • 0x80040900 Outlook Error Code – How to Fix Steps
  • 0x80070057 Outlook Error Code – How to Fix Steps
  • 0x800CCC92 Outlook Error Code – How to Fix Steps
  • Outlook Cannot Connect To Your Outgoing Smtp Email Server Gmail – How to Fix Steps
  • 3260 Outlook Error Code – How to Fix Steps
  • Microsoft Outlook Access Denied – How to Fix Steps
  • Outlook Not Implemented 2013 – How to Fix Steps
  • 0x8004011d Outlook Error Code – How to Fix Steps
  • 0x8004102A Outlook Error Code – How to Fix Steps
  •  

    June 10th, 2016

    Posted In: Microsoft Outlook

    « Previous PageNext Page »
    LiveZilla Live Chat Software